Chipping a Saxon

Well over the last few days I've managed about an hour on the loco. This job was a bit fiddly, wiring the lighting, smoke chimney and multisocket. 16 wires in total took me time and got there in the end.
Picture shows all wiring in position before putting lid on
fb373e438f8143ac98f2c0404d49c5dc.jpg
 
The finished article, sitting in Nutbrook station with sister loco.
6887b2e223c240aea63dc6fabcce5198.jpg
 
ah but the pride off saying i did this....:thumbup:
 
Me smokey chimney doesn't work, any ideas
Its wired to +24 and F1 on the loco. I have turned the CV down to 6% (about 4.5v) as its a 5v unit.
 
try f7....
 
mike said:
ah but the pride off saying i did this....:thumbup:
Click to expand...

Thats correct Mike, I had one or two offers to do it for me, but I wanted to do it myself, to learn about digital chips and to get the jist.
Having said that I couldn't have done it without the help the PMs and commemts on this thread, and for that I thank all of you who advised me...............:thumbup:
 
now ur wondering how iknew:rolf::rolf::rolf:
 
Hows that visaton speaker Steve????????

Good are'nt they?
 
Philbahn said:
Hows that visaton speaker Steve????????

Good are'nt they?
Click to expand...

PARDON
Had to turn sound down last night after SWMBO gave me a Bo...king for being to loud at half 10. Turned Volume from 32 half, to 10.
I need to set up the sounds a little better, how do I do that, like increase the amount of chuffs per revolution, set some of the standing sounds etc.
 
told u..mines on 7...do they listern..:rolf:
 
You must log in or register to reply here.
Back
Top Bottom