Hi all,
I will have 2 loops of approx 150 feet each connected via a smaller loop on side, they will be split as I have a booster,
mostly Aristocraft track using the screws provided,
The top loop is approx 18 inches higher and has 2 gates through it so needs bridges to copensate for this,
The bottom loop is continous with no breaks, (poss may have a branch off to a station with sidings)
Q1 .. will the LGB MTS be enough to power the track due to its length ( booster for 2nd section)
Q2 .. where would you split the tracks up ? (does it matter ?),
ie .. split where the gates are in creating 2 seperate sides with the plastic joiners by the bridges/gates, also on the bottom level I would need to put plastic joiners for the split,(around same place),
or keep both the loops seperate (top/bottom) with plastic joiners only at the connection loop (this then gives you no connections at all on the bottom loop, top only by the bridges).
Many thanks to all for any advice given.
I will have 2 loops of approx 150 feet each connected via a smaller loop on side, they will be split as I have a booster,
mostly Aristocraft track using the screws provided,
The top loop is approx 18 inches higher and has 2 gates through it so needs bridges to copensate for this,
The bottom loop is continous with no breaks, (poss may have a branch off to a station with sidings)
Q1 .. will the LGB MTS be enough to power the track due to its length ( booster for 2nd section)
Q2 .. where would you split the tracks up ? (does it matter ?),
ie .. split where the gates are in creating 2 seperate sides with the plastic joiners by the bridges/gates, also on the bottom level I would need to put plastic joiners for the split,(around same place),
or keep both the loops seperate (top/bottom) with plastic joiners only at the connection loop (this then gives you no connections at all on the bottom loop, top only by the bridges).
Many thanks to all for any advice given.