Katzberg Bahn

duncan1_9_8_4 said:
We thought that after cementing it down. Oh dear.
Click to expand...
Hm Duncan little bit concerned at the Slab overlap both sides. I would have either cut slab down to match width of block or made the support to match width of the slab. A lot of weight on the unsuported bit will certainly tip it over no matter how well you have cemented it. Sorry to be doom merchant, but well.
JonD
 
dunnyrail said:
Hm Duncan little bit concerned at the Slab overlap both sides. I would have either cut slab down to match width of block or made the support to match width of the slab. A lot of weight on the unsuported bit will certainly tip it over no matter how well you have cemented it. Sorry to be doom merchant, but well.
JonD
Click to expand...


That sounds like concrete advice.....

David
 
Meanwhile, over in the next village at the Katzburg line, my Dad's T3 out in service after some extensive track work to make the bloody thing fit. IMG_20220829_164109.jpgIMG_20220829_163757.jpgIMG_20220829_163533.jpgIMG_20220829_163504.jpgIMG_20220829_163500.jpgIMG_20220829_163312.jpgIMG_20220829_163306.jpgIMG_20220829_163230.jpgIMG_20220829_163220.jpgIMG_20220829_163159.jpgIMG_20220829_163155.jpgIMG_20220829_163153.jpgIMG_20220829_163115.jpgIMG_20220829_163110.jpgIMG_20220829_163024.jpgIMG_20220829_162936.jpgIMG_20220829_162930.jpgIMG_20220829_162904.jpgIMG_20220829_162846.jpg
 
Took a few Locomotives to the parents garden railway for a running session, from the Woodlock Logging Railroad.

Unfortunately it was too windy to run any wagons as they kept blowing over.
PXL_20240323_095808517.jpgPXL_20240323_095750760.MP.jpgPXL_20240323_095819569.jpgPXL_20240323_095927743.jpgPXL_20240323_095301336.jpgPXL_20240323_095238866.jpgPXL_20240323_100133800.jpgPXL_20240323_134650969.jpgPXL_20240323_134754066.jpgPXL_20240323_134943809.jpg
 
You must log in or register to reply here.
Back
Top Bottom