What type connector is this please ?

maxi-model

maxi-model

UK/US/ROW steam narrow gauge railways 1:1
Country flag
Tried using gemini AI to identify but came up with wrong type. It's an oldie, as in 27 years, an RCS ESC/sound activation/light direction unit. Just need to hook up to the 3 pin socket on right for sound function activation. Thanks in anticipation. Max

20260305_114649.jpg20260305_115207.jpg
 
dunnyrail said:
Or could they be JST with pins at roughly 2.5mm separation? If Phil cant help I have few JST 3 pin jobbies.
Click to expand...
Well spotted Jon. My including a scale was not wasted :) I thought I could rummage in my "assorter of electrickery" and see if I had something that I could solder wires to to fit individually. Max
 
Definitely Molex. KF2510 connector family, and 2.54mm (0.1inch)pitch.

I have plenty (some) of the 2-pin, and should have 3-pin kicking about..

The pins are a little bigger than many other connector-series, so anything else you try will be a tight fit. - So no good for anything else, afterwards.

PhilP.
 
Theoretically, the 3-pin connector from a servo will be the same pitch, but servo-connector pins are finer.

I have used the crimp-pins from these (covered with heatshrink) on LGB motor-block pins, so possibly a 'better' fit if removed from the housing?

I continue to rummage, though not my highest priority job.

PhilP.
 
PhilP said:
Theoretically, the 3-pin connector from a servo will be the same pitch, but servo-connector pins are finer.

I have used the crimp-pins from these (covered with heatshrink) on LGB motor-block pins, so possibly a 'better' fit if removed from the housing?

I continue to rummage, though not my highest priority job.

PhilP.
Click to expand...
Not found one, but did find several 2-pin..

Checked the fit of a servo plug, and it is better than I thought.

@maxi-model
I can slip a servo lead in with the rest of your items. :)

PhilP.
 
PhilP said:
Not found one, but did find several 2-pin..

Checked the fit of a servo plug, and it is better than I thought.

@maxi-model
I can slip a servo lead in with the rest of your items. :)

PhilP.
Click to expand...
Thank you Phil. Yes, pop one in I'll give it a go. Max
 
You must log in or register to reply here.
Back
Top Bottom