What type connector is this please ?

[maxi-model]

Tried using gemini AI to identify but came up with wrong type. It's an oldie, as in 27 years, an RCS ESC/sound activation/light direction unit. Just need to hook up to the 3 pin socket on right for sound function activation. Thanks in anticipation. Max

 

[PhilP]

Think you will find it is a Molex of some description?

I may well have one kicking about..

PhilP.

 

[dunnyrail]

Or could they be JST with pins at roughly 2.5mm separation? If Phil cant help I have few JST 3 pin jobbies.

 

[maxi-model]

Or could they be JST with pins at roughly 2.5mm separation? If Phil cant help I have few JST 3 pin jobbies.

Well spotted Jon. My including a scale was not wasted I thought I could rummage in my "assorter of electrickery" and see if I had something that I could solder wires to to fit individually. Max

 

[PhilP]

Definitely Molex. KF2510 connector family, and 2.54mm (0.1inch)pitch.

I have plenty (some) of the 2-pin, and should have 3-pin kicking about..

The pins are a little bigger than many other connector-series, so anything else you try will be a tight fit. - So no good for anything else, afterwards.

PhilP.

 

[PhilP]

Theoretically, the 3-pin connector from a servo will be the same pitch, but servo-connector pins are finer.

I have used the crimp-pins from these (covered with heatshrink) on LGB motor-block pins, so possibly a 'better' fit if removed from the housing?

I continue to rummage, though not my highest priority job.

PhilP.