WANTED - MTS fitted KOF Loco with Remote Uncouplers

Lots of good ideas and info here folks? Many thanks!

I'd like to eventually fit a sound decoder to the loco, and Dutchelm's conversion of the red 21900 analogue model intrigues me.

I read that for this loco you set your control knob to 1.0-1.5 which drives the coupler and then puts on the red cab light on completion. You can then turn the knob further to drive the loco away.
http://www.champex-linden.de/lgb_pr...F10BD802FC4A185256931005F8190/$FILE/21900.pdf
Not sure how this would be done with a Universal Remote if the loco was fitted with a (sound) decoder but I guess it would be setting to 1-2 steps. Can you clarify please Mike?
 
Gizzy said:
I'd like to eventually fit a sound decoder to the loco, and Dutchelm's conversion of the red 21900 analogue model intrigues me.
Click to expand...
The analogue system doesn't work very well. I stripped everything out & fitted a ESU sound decoder. I put a pair of small interposing relays in the cab to work the couplings, smaller ones are available but these were free. These were driven from the decoder. A 12 v stabilised supply was needed to work the couplings.
34bb5a5f80cb4e498058eab769cbdaba.jpg
 
It would only let me put on one photo so here is the other.
a83e4510e143404ba7cb19b6916ba42e.jpg
 
dutchelm said:
Gizzy said:
I'd like to eventually fit a sound decoder to the loco, and Dutchelm's conversion of the red 21900 analogue model intrigues me.
Click to expand...
The analogue system doesn't work very well. I stripped everything out & fitted a ESU sound decoder. I put a pair of small interposing relays in the cab to work the couplings, smaller ones are available but these were free. These were driven from the decoder. A 12 v stabilised supply was needed to work the couplings.
images
Click to expand...
Thanks for that Mike....
 
Gizzy - have you noticed the one Alec posted for sale earlier today....?

http://www.gscalecentral.net/m157534 Jon.
 
You must log in or register to reply here.
Back
Top Bottom