North American 3D printed models

jwchenard

Registered
Country flag
After an extensive surge, I have determined that there are no North American trolleys/streetcars available on any of the 3D sites. (In ANY scale!) Quite a few European and Australian options, though.

Anyone know of any available? I'd certainly be willing to pay a good price for a decent 3D model of a common prototype.
 
After an extensive surge, I have determined that there are no North American trolleys/streetcars available on any of the 3D sites. (In ANY scale!) Quite a few European and Australian options, though.

Anyone know of any available? I'd certainly be willing to pay a good price for a decent 3D model of a common prototype.
Hm surprised none of the plans do not cover PCC’s (heavily used in Belgium) or the USA types used in MIlan Italy
 
I found two US outline 3D models in non-printable OBJ format - you might want to enquire with the creators whether a format conversion to .STL format is possible and under what financial terms. PCC Streetcar and Pacific Electric

Also this O gauge tram supplier can print in different scales, might be worth inquiring if there is anything of interest.

The Tokyo TKK 200 looks interesting to me . . .

Interesting to note both those tram types have been produced as 45mm gauged models the PCC by Aristocraft and the "Pacific Electric" by LGB. Different scales though. I used to have the latter on my line, in its "New Orleans guise. Then there are the Bachmann trams. And OcCre have produced a laser cut kit of the SanFransisco cable car that Jimmy on here has blogged a build of. Ok, none 3D prints, which you can scale, but a start point for a steet car fleet. Max

My LGB "New Orleans" guise. Something I wish I had kept.
Tram 003.jpg
 
Interesting to note both those tram types have been produced as 45mm gauged models the PCC by Aristocraft and the "Pacific Electric" by LGB. Different scales though. I used to have the latter on my line, in its "New Orleans guise. Then there are the Bachmann trams. And OcCre have produced a laser cut kit of the SanFransisco cable car that Jimmy on here has blogged a build of. Ok, none 3D prints, which you can scale, but a start point for a steet car fleet. Max

My LGB "New Orleans" guise. Something I wish I had kept.
View attachment 356923
I had one of those cars but in red and creme (New York Inthink), trouble for me was the scale it was towards the 1:30 end and thus looked way too small with all my other stock. Glendale moved it on for me.
 
I found two US outline 3D models in non-printable OBJ format - you might want to enquire with the creators whether a format conversion to .STL format is possible and under what financial terms. PCC Streetcar and Pacific Electric

Also this O gauge tram supplier can print in different scales, might be worth inquiring if there is anything of interest.

The Tokyo TKK 200 looks interesting to me . . .

Thanks. I was hoping to find a model printable on a filament printer for US$50 or less. Those are all significantly more than that!
 
Back
Top Bottom