Hi All. I am based in Singapore. I have just encountered a problem with my 35010 unit. The output power to the track is 2.1V. I measured using my multi-meter measuring AC voltage up to a range of 200V. The power input from the transformer is 15V. I am using this for my 00/H0 layout. It has been running very well for more than 5 years until I encounterd this problem. Hand held controller is the 35017 Navigator on wireless mode. Has anyone encountered this issue before and what could be the problem? Thank you.
LGB 35010 Command Station
- Thread starter dalkhaw
- Start date
Gizzy
A gentleman, a scholar, and a railway modeller....
Although you are measuring DCC and not AC, I would expect to see at least 18 Vac on a multimeter.
These LGB units haven't been made for sometime now, and it has probably failed. Nobody in Europe seems to support it anymore, so you might have to find a serviceable second hand one to replace it....