digitalizing a Peco turnout

borsig1963

Registered
Country flag
Hello everyone, I need to digitalize (or digitize?) a Peco turnout. I’ve seen that there is an accessory called the PL-8 for connecting it to the LGB EPL system, but it’s not easy to find in Italy—and in any case, it would be absurdly expensive. Is there an alternative solution, or should I just give up? (...or maybed a 3d solution?)

Best regards and thanks, Paolo
 
Hullo Paulo, yes the PL-8 is designed to connect the LGB point motor to the Peco point.


We use them on our Compton Heath layout.

I'm surprised to hear that these are not easily available in Italy, as I thought Peco track was sold worldwide. Have you tried to email info@peco.co ?

They might be able to help....
 
Last edited:
Hullo Paulo, yes the PL-8 is designed to connect the LGB point motor to the Peco point.


We use them on our Compton heath layout.

I'm surprised to hear that these are not easily available in Italy, as I thought Peco track was sold worldwide. Have you tried to email info@peco.co ?

They might be able to help....

G scale comunity in Italy is very small and nobody use Peco, I think to be the only one with Peco G scale track (well used in H0 btw)

no problem I'll look for some on ebay, thanks

pz
 
G scale comunity in Italy is very small and nobody use Peco, I think to be the only one with Peco G scale track (well used in H0 btw)

no problem I'll look for some on ebay, thanks

pz
Another option may be to try one of the larger German ir Dutch suppliers?
 
Other than a private sale, supply into the EU is now problematic.
This since the GPSR came into force.

PhilP.
 
Are Peco track products sold in Italy at all? If you can find a local stockist of their smaller gauges (HO or N), then they may be able to special-order some of the G gauge items for you?

Jon.
 
Back
Top Bottom