Colour light signal gantry.
- Thread starter KeithT
- Start date
D
Deleted member 1986
Guest
7110 two track lighted signal bridge
A article by Ted Doskaris at the following link might prove to be useful:
http://www.elmassian.com/index.php?option=com_content&view=article&id=248&Itemid=383
Last edited by a moderator:
KeithT
Hillwalking, chickens and - err - garden railways.
Ye Gods! How to make something complicated. I thought it would be simple. Looks as if it will just get track power and fixed green.
Thanks for the link.
Gizzy
A gentleman, a scholar, and a railway modeller....
I wired up one of these to work off LGB Point micro switches powered by the MTS supply.
One thing I found was that the LEDs were reversed biased when checking with a DC Bench PSU. (Black wiring was positive and red negative.) However, with MTS this wasn't an issue....
One thing I found was that the LEDs were reversed biased when checking with a DC Bench PSU. (Black wiring was positive and red negative.) However, with MTS this wasn't an issue....
Last edited:
Greg Elmassian
Guest
whoops, missed the link in an earlier post..
Greg
Greg
Last edited:
KeithT
Hillwalking, chickens and - err - garden railways.
Thanks Greg but this is beyond my basic skills.
It will probably end up with a basic all green aspect.