Bi led, Common Anode or Cathode

[PhilP]

If you wish to use two-wire (bi-colour) LEDs, with the MR603, you will need to get the latest firmware loaded into your receiver. - It will be fixed, in the next batch.

PhilP
Message me, if you need more information..

 

[collectors]

If you wish to use two-wire (bi-colour) LEDs, with the MR603, you will need to get the latest firmware loaded into your receiver. - It will be fixed, in the next batch.

PhilP
Message me, if you need more information..

Must admit, i thought it was advertised as "

P outputs:

(P1..P6), 0V when off, 3.3V when on, max 20mA. Or has this got to be programmed. ?

 

[PhilP]

RTFM.

P1 and P2 will give you directional lights - see post #9..

But this will not work. - This is a 'feature', Sir..
To correct this, will require v1.1 software writing to your receiver..

As you were asking about this, I thought it an idea to let you know it would not work, with a MR603a.

PhilP

 

[collectors]

RTFM.

P1 and P2 will give you directional lights - see post #9..

But this will not work. - This is a 'feature', Sir..
To correct this, will require v1.1 software writing to your receiver..

As you were asking about this, I thought it an idea to let you know it would not work, with a MR603a.

PhilP

Hi, is there a link to the v1.1 download as yet with instructions on how to update. ?? Thanks

 

[PhilP]

Hi, is there a link to the v1.1 download as yet with instructions on how to update. ?? Thanks

You will have to send the receiver back, I am afraid..

PhilP

 

[collectors]

You will have to send the receiver back, I am afraid..

PhilP

Hi, Just to make sure, is that the address with the PC: YO17 6NJ
Thanks

 

[PhilP]

Hi, Just to make sure, is that the address with the PC: YO17 6NJ
Thanks

Yes, but an email to Andy first, might be an idea.

PhilP