I do have a home build 15A trafo (2x7.5A) that was build into a VERY cheap toolbox .
Friday the post delivered a makita toolbox ., its a older type and it was dirty
.
After cleaning , it was time to demolish the old one
.. en build in to the makita toolbox .
We did have a old Minion travel case witch was broken , so i take the advantage to use the front and side vor a cover , because the Trafo is for the children .
its a simple trafo , 24V 15A split in to 2x7.5A , with for and backwards function and speed control .
if necessary it can be split in to 3x5A .
Total cost of this trafo was 25 euro ..and a view hours time on labor , a 5A or 10A jumbo are very expensive.
The quality my not be so good as LGB piko ore others , but it.s save and wil do the job
And a smal video .. easy to set up , and quikly to out a way .
Friday the post delivered a makita toolbox ., its a older type and it was dirty
.After cleaning , it was time to demolish the old one
.. en build in to the makita toolbox .We did have a old Minion travel case witch was broken , so i take the advantage to use the front and side vor a cover , because the Trafo is for the children .
its a simple trafo , 24V 15A split in to 2x7.5A , with for and backwards function and speed control .
if necessary it can be split in to 3x5A .
Total cost of this trafo was 25 euro ..and a view hours time on labor , a 5A or 10A jumbo are very expensive.
The quality my not be so good as LGB piko ore others , but it.s save and wil do the job
And a smal video .. easy to set up , and quikly to out a way .