Will lgb 65006 digital sound retro fit work on old 2051 loco?

stevedenver

stevedenver

Registered
Country flag
I bought this on eBay, not realizing that it was for the digital version of the V 51 Loco. I

have a 2095 OBB diesel and a 2051 DB diesel. These are standard analog boards. Is there a way I can simply add power to this board and get sound ?

The board is designed for the MTS/MFX? Board.

I don’t want to destroy this board with experimentation. I would love to be able to use it , off of DC track power, as I really like the sound features, but I may simply have bought something that won’t work Thoughts comments, and direction greatly appreciated. Thanks.
 
I fitted a 65001 to a V52 diesel, and used it on DC, before I upgraded to DCC (MTS).

The sound worked when the power control was turned on.

I found with practise, I could turn the control to just above zero, stopping the loco but maintaining the sounds.

I was using the ART Train Engineer in those days, fed from a LGB transformer, then later a ART PSU....
 
Well, I appreciate the advice, but im asking about the 65006, different unit. Designed to fit on a digital board.
 
stevedenver said:
Well, I appreciate the advice, but im asking about the 65006, different unit. Designed to fit on a digital board.
Click to expand...
I appreciate your point, but it still might work on analogue DC.

My 65001 had to be programmed with the same address as my V52 loco so that both worked together on my MTS and later Massoth 1200Z.

I would have assumed that Maerklin would have made it work, both for DC and DCC, but you might have to check the documentation for the 65006 to be certain....
 
Does this help?

idlemarvel

Thread 'LGB 65006 sound module hints and tips'

This is a bit of a peculiar beast. I bought it for my LGB 24520 narrow gauge diesel which has a built in MTS decoder. The 65006 is more or less designed for this diesel although you could use it with any diesel if you’re not too fussy about authentic sounds. It is a self contained sound decoder which works independently of the motor and lights decoder, taking power directly from the track, so it’s similar to the Massoth S decoder in that respect, although nowhere near as functionally rich. in fact it is the same from a sound perspective.

So why would you buy one...
  • Like

PhilP.
 
PhilP said:
Does this help?

idlemarvel

Thread 'LGB 65006 sound module hints and tips'

This is a bit of a peculiar beast. I bought it for my LGB 24520 narrow gauge diesel which has a built in MTS decoder. The 65006 is more or less designed for this diesel although you could use it with any diesel if you’re not too fussy about authentic sounds. It is a self contained sound decoder which works independently of the motor and lights decoder, taking power directly from the track, so it’s similar to the Massoth S decoder in that respect, although nowhere near as functionally rich. in fact it is the same from a sound perspective.

So why would you buy one...
  • Like
Click to expand...
I did read that thread. I just didnt want a $200 experiment to go bad…so i was hoping for someone who had actually used it analogue. Its also extra caution because i know so little about dcc.

Ill give it a try when it arrives. Unless someone cautions otherwise in the interim.
 
I think your only problems will be if you need to alter any of the default settings..

You would need access to a DCC system for this.

PhilP.
 
I found this link to the 65006 manual . . .

www.manualslib.com

Analog Operation; Digital Operation; Controllable Functions - LGB 65006 Manual [Page 10]

LGB 65006 Manual Online: analog operation, Digital Operation, Controllable Functions. The Sound Will Turn On When The Track Voltage Is About 7 Volts Or More. The Sounds Are Played Back As Long As There Is Enough Voltage In The Track. The 65011 Standing Sounds Power Supply Module Must...
www.manualslib.com www.manualslib.com

I have no personal experience of this sound unit but page 10 of this manual includes this . . .

1747322343618.png

. . . and page 30 has the Figure 4 referred to above . . .

1747322653730.png

Surprising then that LGB (who go, or at least used to go, to great lengths to stress that things are suitable for digital and analogue operation, make no such claim in their Product Information for this item.

Hope this helps.

David
 
You must log in or register to reply here.
Back
Top Bottom