USA Trains smoke units working with QSI DCC

[Thirdrail68]

Thought I would ask again, been a while.

I have three superb USA Trains locos all powered by three superb QSI DCC Titan decoders. Everything works fine but I cannot work out how to programme the smoke units to work with these decoders.

All the decoders are fitted to an adapt a boards.

It's really annoying seeing other g scale locos smoking away but at this time it seems impossible to control the units via dcc.

Has anyone managed to achieve this

Cheers
Steve

 

[beavercreek]

Try this Steve:
http://www.elmassian.com/dcc/specific-manufacturers/qsi-equipment/qsi-titan/titan-smoke.html

 

[Greg Elmassian]

http://www.elmassian.com/index.php?option=com_content&view=article&id=522&Itemid=633
http://www.elmassian.com/index.php?option=com_content&view=article&id=522&Itemid=633

 

[Greg Elmassian]

oops dup post

there are many pages on QSI... select the DCC header from my site, and then go to the specific manufacturers, and then QSI, the main page, sub pages, and specific pages on just the Titan.

Greg