Ask the person who's fitting the decoders if you can, and how to do it, would probably be easiestThanks, but thank was just wondering because I’m getting my LGB locomotives fitted with DCC so I want to if it is possible or not for when I get them back
That is technically possible within the DCC specifications.Hi, does anyone know if I can turn on the front lights and rear lights at the same time
Whether it is possible for you may vary, depending on specifically which DCC decoder is actually installed on the loco concerned.an LGB locomotive with a DCC installed
It may be tricky with an LGB remote like a 55015, especially if it it is not a 55015pusing the universal remote (aka LGB 55015)?
sorry i responded so late, for the main system im using the Massoth Wireless DCC Starter set (Massoth DiMAX 1210Z Central Station, Massoth DiMAX Navigator 2.4GHz) and for the booster I'm using the Massoth DiMAX 1202B Digital Booster, and finally for the decoder, I'm having a Massoth eMOTION XXL II Locomotive Decoder installedSame answer applies... for a modern decoder, probably.
You do realize that your controller can only run 14 speed steps.... and limited on functions too... what decoders are you having fitted?
You should really step up your controller to 28/128...
You should describe the entire system, the main system (command station, booster, cabs) and what types of decoders you are to have fitted.
Otherwise you may have the capability in the locos but cannot control them... also you might have the controllers to do what you want, but the decoders incapable of the functions you want.
Greg
Alright thanks!Try post #7, if that does not work, you need to program the decoder.