Rail clamps for code 250 rail?

[Northsider]

I'm having trouble with the alignment of rails at either end of a removable bridge, and have come to the conclusion that rail clamps might provide a solution. Are there clamps available for code 250 Peco track?

 

[whatlep]

I'm having trouble with the alignment of rails at either end of a removable bridge, and have come to the conclusion that rail clamps might provide a solution. Are there clamps available for code 250 Peco track?

Yes! See http://www.gardenrailwaycentres.info/shop/index.php?_a=viewProd&productId=1899 < Link To http://www.gardenrailwayc...rod&productId=1899 for example. Other brands are available, as are other retailers.

 

[Northsider]

That looks perfect! thanks for the link.

 

[bobg]

I have a similar section on the T.V.B.L. I use standard Peco fishplates carefully eased with a small screwdriver. These are pushed fully on to the rail end and then slid back over the gap to make the link. Works fine!

 

[Northsider]

Now why didn't I think of that?:crying::crying:

 

[muns]

I can obtain some Massoth Code 250 Nickel Plated rail clamps if you require
http://www.massoth.com/en/produkte/spur1.en.php
£1.25 each.