Piko mogul not behaving
- Thread starter kim
- Start date
kim
retired at last
Sorry for the delay in responding John, just reread the booklet and the maufacturer is SoundTraxx.
Greg Elmassian
Guest
OK, on the pickups, when the loco is lying upside down and you test with a meter, not the same as the loco moving. You may have an intermittent.
The other issue is still about power pickup, uneven track will lift a wheel here and there and can affect how well the loco is picking up voltage.
Looks like this might have been the problem, also issues like over gauge wheels and tight track gauge can wreak havoc.
Greg
The other issue is still about power pickup, uneven track will lift a wheel here and there and can affect how well the loco is picking up voltage.
Looks like this might have been the problem, also issues like over gauge wheels and tight track gauge can wreak havoc.
Greg
D
Deleted member 4232
Guest
Moved
Last edited by a moderator:
kim
retired at last
I have had a response from Piko re my report on the loco behaviour. They state that the track voltage should not exceed 19v as this can cause problems with the SoundTraxx decoder. The instruction manual states not to exceed 24v in analogue and the wiring scheme for the decoder doesn't show any voltage except between 16-24v for an optional external capacitor to, I assume, give continuous running over points etc.
Greg Elmassian
Guest
That's why I no longer use SoundTraxx anything, had this issue with the original Tsunami.
I thought this was fixed in the new models?
Greg
I thought this was fixed in the new models?
Greg
kim
retired at last
Perhaps Piko thought so as well Greg, then found out it wasn't. I have 2 Piko loco's and there has been issues with both digitally, there will be no more!