Massoth Navigator and Zimo decoder setting question

pageeddie

pageeddie

Garden Railway, Reading, Online Poker, Travel
Country flag
I recently bought the massoth dimax system to convert my G scale layout to DCC.
I had Zimo decoders fitted into my locos, which are all LGB
On looking at the decoder information on the Navigator, it shows a number of options for the Loco direction, namely single or double arrows left or right, also a option showing both a left and right arrow.
I cannot find any explanation of what these options mean in any documentation either for the Navigator or the decoder
Does anybody have any explanation please
 
1619886834559.png
Are you talking about the Direction indicator on the "Decoder Programming/Loco Address" screen?

This screen will allow programming of several CVs that relate to the loco address and operating modes/direction.
It will program CV29 and CV1 (Short Address) or CV17/18 (Long Address).

CV29 will defines some settings including the number of speed steps, the addressing mode (long or short) and the direction that the loco will travel.

The Direction option has two settings....
-> -> (the loco will go forward when asked to go forward) or
-> <- (the loco will go backwards when asked to go forwards).

Hope this helps
 
Thanks for the help with this,
This is the reply I got from Massoth Tech Support
"The Arrows in the Navigator for loco address direction are really for the
direction.
All decoders have in CV29 a direction bit for standard or inverse direction.
This is e.g. used for a traction with two FA units.
The first FA unit is programmed with standard direction (arrow right)
Th second inverse FA unit is programmed with inverse direction (arrow left).
On the Track, both locos receive the same forward command but the second
loco drives then automatically backwards in the traction."
 
You must log in or register to reply here.
Back
Top Bottom