LGB SAXON 1K/2K SPARE PARTS

[MTheStrong]

I recently purchased a Saxon 1k and discovered that it is missing 2 pipes on the left hand side of the loco.



I contacted LGB to see if they had any available. Unfortunately the various LGB Saxon Locos have been out of production for some time. I saw and advert on Ebay for a Saxon 1K kit that showed one of the missing pipes. Here is a link to the advert:

https://www.ebay.co.uk/itm/117300071235?var=&itmmeta=01M121C7K2BVZZ5AAAJYJBV1VQ&hash=item1b4fa10b43

I contacted the kit seller who mentioned that the kit was made from stl files at G-Scale Locomotive by pmo. The parts list can be found here: Saxon 1k Parts Pick List Sadly I could not find any files for the pipes.

So I wonder if anyone has the pipes and are illing to sell them or knows where I can find them. If not is there anyone who can produce the STL Files and produce them on a 3D Printer?

Martin

 

[dunnyrail]

Should be possible to recreate using old Mains Power Copper cable if you have any hanging about, have used it for pipework on my Harz Mallets during backdating to East German days c1980’s look.