Hi
I am using LGB 55025 MTS Switch Decoder, Four Channel to switch the points on a new layout under construction on the Isle of Man.
I understand that I can change the CV values in the decoder to provide a on off output, what I cannot find is what is the voltage and is it AC or DC when set to this mode.
I want to use some of the outputs to operate colour light signals via a small relay I am aware that the maximumoutput per channel is 1500mA with the total output from the 55025 being limited to 3000mA but cannot find voltage information anywere. Can anyone help.
I could do this using point motors fitted with supplimentry switches but since I will be putting in 10 signals this gets expensive.
Regards
Ian
I am using LGB 55025 MTS Switch Decoder, Four Channel to switch the points on a new layout under construction on the Isle of Man.
I understand that I can change the CV values in the decoder to provide a on off output, what I cannot find is what is the voltage and is it AC or DC when set to this mode.
I want to use some of the outputs to operate colour light signals via a small relay I am aware that the maximumoutput per channel is 1500mA with the total output from the 55025 being limited to 3000mA but cannot find voltage information anywere. Can anyone help.
I could do this using point motors fitted with supplimentry switches but since I will be putting in 10 signals this gets expensive.
Regards
Ian