Bernigadine, my garden railway.

[railaddict]

In July, I cleaned the track from the mixture soil/ballast/gravels that had accumulated with the years of kids running on the track. The point leading to the workshop had even been buried. Unfortunately,the motor didn’t last and I’ll have to replace it.


















Ithen set about ballasting the track again and adding gravel to markout the ballast bed. Here you can see the different stages.






















Before ballasting, however, I had to sieve the different types of gravel and

ballast to separate them and remove the soil that had got everywhere,which explains the many hours spent sieving.



Filling the bags with mixture.



How it looks, coming out of the bag.



Separating the different elements.

 

[railaddict]

the different elements : from left to right : gravel, ballast,soil, vegetation and other dirt and finally decorative gravel.




This shows the various containers: a bucket for the gravel, a Royal Canin bag for the ballast, a paper bag for vegetation and other debris, and a paper bag on the right for decorative gravel. The soil is crushed and the resulting powder falls into the large bucket.

 

[viaEstrecha]

Brilliant - I have only just found this thread! I love to see someone else working hard on their railway

 

[Chris Vernell]

Brilliant - I have only just found this thread! I love to see someone else working hard on their railway

I love work; I can watch it for hours.

 

[maxi-model]

Your dedication to the sifting and recycling process of granite chippings is to be much admired. Your line in its resuscitate state looks great. I once went out into the road outside my house, after some resurfacing works was done, to recover some of the loose granite chipping "dressing" they applied. It was lying in the gutters and just the right grade, it would have been a pity if it was wasted. Yes, part of my line's ballasting was sourced that way. Don't ask about the coal loads.

 

[dunnyrail]

I would be very surprised if that point motor is trashed, they are near indestructible so a good clean up and try with power to just the motor bit may prove that. I have had many well rusted and in awful condition, all have been brought back to working order except for possibly one that was really really very badly rusted inside.

 

[PhilP]

Your dedication to the task is exemplary.
The result is looking very good.

PhilP.

 

[Gizzy]

I am looking forward to seeing your layout progress....

 

[Northsider]

As a fellow 'summer of 26 ballaster', I can only praise your dedication in recycling your existing ballast! I removed what remained of the Rowlands Mix* from my line before levelling and repacking the permanent way with a loose mix of postcrete and horticultural grit. Though I say it myself, it compares reasonably well with the line on the Baie de la Somme, to my eyes at least...


...although their scenery is better!

*Rowlands Mix is a British invention, made up of peat, sand and cement. It looks very much like the ballast on a run-down narrow gauge railway, and moss grows on it really rather well.
But this becomes a problem if you wish to run trains in the winter, because the moss expands, freezes solid and prevents trains from running!

Apologies for the thread drift...