LGB new to this DCC help?

Hi Pugwash… I cut the fishplate as this is the lifting end of a bar type lifting section.. so it needs to be loose to lift.
Sorry I didn’t explain it properly
Happy Friday
 
Hi chaps
So found out about Piko today same track head height unlike Pico.
Got a right turn R3 for £40
Half the the price of LGB second hand.
Very happy

Motor on the side £30
Also good I feel.

So next question do I go to James Massoth get a decoder £75 which will do four turn outs?

And connect it all to my bus … yet to go in x

Oh and bought three 100 mm bits for £4 each.

Chris W
 
walkerart said:
Hi chaps
So found out about Piko today same track head height unlike Pico.
Got a right turn R3 for £40
Half the the price of LGB second hand.
Very happy

Motor on the side £30
Also good I feel.

So next question do I go to James Massoth get a decoder £75 which will do four turn outs?

And connect it all to my bus … yet to go in x

Oh and bought three 100 mm bits for £4 each.

Chris W
Click to expand...
 

Attachments

  • IMG_3929.jpeg
    IMG_3929.jpeg
    368.4 KB · Views: 0
  • IMG_3927.jpeg
    IMG_3927.jpeg
    906.3 KB · Views: 0
  • IMG_3926.jpeg
    IMG_3926.jpeg
    271.1 KB · Views: 0
  • IMG_3928.jpeg
    IMG_3928.jpeg
    821.5 KB · Views: 0
Hi chaps
So it was to make the lifting end of my bridge …. Allow access to the garden.
Also today I got a Piko 35223 right turn Radius 3 for £40
Is that a good price as all the second hand LGB is £80
I added a turn out motor for £30 so should work for my DCC run ?
All advice is welcome x

Chris
 
You must log in or register to reply here.
Back
Top Bottom