I can still only post a pic at a time so...
I have seen one of these cut in half and and joined to another one and made into a very nice bogie tram. My suggestion before anyone try's this is to make sure your razor saw is sharp and not biased, mine wanted to cut to one side which meant I had to cut well away from the line and sand it back till I got a good fit..... I used the old fine sandpaper glued to an A4 sheet of ply trick to get it all straight and true, though some filler will still be needed. The end has to be cut away but I left it intact so that its all held together until the glue sets, then I can start taking out the ends.... Removing the bumper and trimming the end platform has also helped with the illusion.
Ok the file upload failed and its 155kb.... Back to the blog.. sorry