sunday maitenance

S

spurs123

led zep spurs lgb
noticed that the track bed wash drooping under the weight of the v52 when I took the ali edges off saw that the ply was a bit rotten.

[attachment deleted by admin]
 
so with the daylight fading I decided to mend/ replace the manky ply , a quick trip round the outlaws to get the jig saw back and had to listern to how lucky spurs were and the back home to cut up a sheet of ply and all I had to cover it was a can of ronseal stuff in a grotty red , but after an hour job done

[attachment deleted by admin]
 
it will look better when the ali edges are back and the track is ballasted

[attachment deleted by admin]
 
I'd be tempted to seal the edges with a couple of coats of shellack - belt and braces never hurts and can save some heart ache
 
Decking board works for me :D
 
How do you join the pieces of decking Steve
 
Nice and neat Steve. But I agree - thats what I did. Two layers one half overlapping the one below and plenty of wood screws. :)
 
Did not take any more pics , flat steel 4" square 3 holes each side joints glued ,Ian S knows what the glue is its the dogs diddly bits
 
Heavy :thumbup:
 
<p>
spurs123 - 8/11/2009 4:56 PM it will look better when the ali edges are back and the track is ballasted
Click to expand...
</p><p>i will check for quallity control purposes on satuday:D </p>
 
Can more than one person check on this shed :D
 
You must log in or register to reply here.
Back
Top Bottom