Re assembling a Stains

FrenchChuffed

Registered
Country flag
I was trying to check my stains loco and took th motor black out, but on re asembeling i cant sort out the valve positions has any one got pictures of both sides of the valve gear Please?
 

Attachments

  • F219C1EC-8B28-4E80-AADE-39C00F30F231.jpeg
    F219C1EC-8B28-4E80-AADE-39C00F30F231.jpeg
    493.3 KB · Views: 0
  • 6C56C547-7512-493E-84B6-B350C73241A9.jpeg
    6C56C547-7512-493E-84B6-B350C73241A9.jpeg
    497.2 KB · Views: 0
The photo's I sent are an older metal-valve-gear model, but the positions are the same..

From your photo's:
The vertical supports, below the footplate, are not seated properly?
Did you remove the pivot/bolt on the LHS?
 
I think if you remove the motion from the right-hand rear wheel, you will be able to rotate the parts to get things in the right orientation?
 
Yes thanks achieved i just hadn’t realised i had reversed the reversing link i think it is so there the same both sides now and its all Woking fine, thanks for your help.
 
Back
Top Bottom