i will check the manualWhat version is your manual? I kept finding version 1.5, so it took digging to get the later versions that John specified.
Perhaps your manual version is earlier?
Greg
i will check the manualWhat version is your manual? I kept finding version 1.5, so it took digging to get the later versions that John specified.
Perhaps your manual version is earlier?
Greg
1.51What version is your manual? I kept finding version 1.5, so it took digging to get the later versions that John specified.
Perhaps your manual version is earlier?
Greg
Thank you for your helpNew issue...
This "slow" is probably a setting for momentum in the loco, or the controller or both.
There are reasons to not have immediate starting and stopping, your trains and their geartrains will last longer.
For the acceleration and deceleration in the loco itself, it is CV3 and CV4, you might want a primer on the typical CV's to change....
On the Massoth control system itself, I'm sure someone here knows. I use Zimo.
Greg
Thank you have just downloaded thisLatest and updated Navigator Manual is V2.10, dated 05/2019.
Downloadable PDF can be found here DiMAX Navigator – Massoth Elektronik GmbH
Thanks againWhat version is your manual? I kept finding version 1.5, so it took digging to get the later versions that John specified.
Perhaps your manual version is earlier?
Greg