Playmobil 2 Modified Cattle Trucks and some other parts 4 lots.

NOTE POSTAGE RATES QUOTED ARE FOR UK ONLY PLEASE PM ME FOR OUTSIDE OF UK AS THIS CAN BE QUITE HEFTY.

LOT 1 and LOT 2 SOLD
Lot 1 Modified Cattle Truck £25 with LGB Wheels plus £2.95 postage.
This has had the Platform Cut off as I was intending to modify it to use as a Tralee and Dingle type of Cattle Car when into Irish Modelling. You can see the changes in the pictures which are for both of the Wagons. The wheels are LGB Solid ones and each Wagon has just 2 buffers (original had 4 but I have used the others elswhere) but the required 2 Coupling Hooks. None of these will be refitted to save possible damage in transit.

Lot 2 another the same as Lot 1.



SOLD OR USED BY Me! Lot 3 2 Single pivot wheel assemblies with Couplings. £5.00 plus £2.95 postage.


SOLD
Lot 4 2 x End Platforms, 2x Weight Mouldings and Weights Footsteps


I

 

[dunnyrail]

Bump still available.

 

[playmofire]

Bump still available.

Has the roof been cut as well, Jon?

 

[dunnyrail]

Has the roof been cut as well, Jon?

No roofs are original length, just camera angle makes look like it has been cut.

 

[playmofire]

Would you swap a roof for an original roof? I'm pretty sure I have one but will check tomorrow. I also know someone who may be interested in one or both. I'll let him know they are for sale.

 

[playmofire]

I've realised looking at the Playmobil catalogues that the US cattle truck which these are is just the UK one with minor changes so what I wanted to do with the roof (put it on the 4122 boxcar - http://playmodb.org/setpics/4/4122.jpg) won't work.

 

[dunnyrail]

I

I've realised looking at the Playmobil catalogues that the US cattle truck which these are is just the UK one with minor changes so what I wanted to do with the roof (put it on the 4122 boxcar - http://playmodb.org/setpics/4/4122.jpg) won't work.

no worries.

 

[playmofire]

Jon, I'm wanting a cattle truck to go with my LGB Toytrain stock and I think the Playmobil body might fit on to an LGB ToyTrain chassis. I have a goods van body which I will do a trial fit with this week and then get back to you.

If you get a buyer(s) in the meantime,, that's not a problem.

Gordon

 

[dunnyrail]

Jon, I'm wanting a cattle truck to go with my LGB Toytrain stock and I think the Playmobil body might fit on to an LGB ToyTrain chassis. I have a goods van body which I will do a trial fit with this week and then get back to you.

If you get a buyer(s) in the meantime,, that's not a problem.

Gordon

Gordon,
Not sure why you would need to swop to a ToyTrain Chassis as the chassis has LGB compatible couplers ready to work ok. You can see that I have put new buffer beams on so would only need a centre buffer to complete and could include a couple of the cut off PM ones to suit. I have some other PM wagons that I run with no issues of compatibility with running or coupling. Have done a quick check and the TT wagon chassis is 5mm longer than the PM body.

 

[playmofire]

Gordon,
Not sure why you would need to swop to a ToyTrain Chassis as the chassis has LGB compatible couplers ready to work ok. You can see that I have put new buffer beams on so would only need a centre buffer to complete and could include a couple of the cut off PM ones to suit. I have some other PM wagons that I run with no issues of compatibility with running or coupling. Have done a quick check and the TT wagon chassis is 5mm longer than the PM body.

It's not a matter of compatibility, Jon, it's the possible use I had in mind. However, I'd like both waggons please.

 

[dunnyrail]

It's not a matter of compatibility, Jon, it's the possible use I had in mind. However, I'd like both waggons please.

Ok they are yours will sort out cost of postage then PM you.