Pilo 25015 booster connection to Lenz LZV100

[Stan Ames]

The Piko 35015 booster uses a 6 conductor RJ12 connector. Does anyone know the pin layout of the connector and have a method for using this booster with other DCC systems such as a Lenz LZV100 or 200.

Thanks

Stan

 

[PhilP]

I would be VERY careful about this!

I doubt the two will be compatible..

I had to send items back to both manufacturers, when a 'helpful person' plugged a Digitrax throttle into a Massoth piece of equipment. £££

 

[dunnyrail]

I would be VERY careful about this!

I doubt the two will be compatible..

I had to send items back to both manufacturers, when a 'helpful person' plugged a Digitrax throttle into a Massoth piece of equipment. £££

I would imagine that Phil is giving top advise here, ignore at your peril I imagine.

 

[Greg Elmassian]

I'd contact Shourt Line in the US... I see the stock unit comes with cables, and a "bus splitter" so the interface is probably a unique data stream.

$270 is a lot of money for a 5 amp booster, I use Tam Valley, about $60 as a remember plus a $50 power power supply.