Nutntooit

[Nutntooit]

Flat cars skelton log cars and trucks are all 3d printed. They are all a free down load from thingiverse.com.
David

 

[Nutntooit]

Yes the cars are 3d printed free down load from thingiverse.com

Yes all the cars and trucks are 3d printed. The only parts that are not 3d printed are the shay wheels and people figures.
David

 

[Paul M]

Looking good, your track bed certainly looks strong enough for anything you want to run. Just a thought, although you're probably planning to anyway, will you be putting a barrier on the raised parts?

 

[Nutntooit]

I have given a barrier some thought but would take a lot of wood becuse all but 25 feet of the 200 foot lay out is 3 to 4 feet off the ground. Back yard is on a steap hill.
David

 

[Paul M]

I have given a barrier some thought but would take a lot of wood becuse all but 25 feet of the 200 foot lay out is 3 to 4 feet off the ground. Back yard is on a steap hill.
David

Yes I see what you mean, but I'd still think about it, as any train you have is likely to be expensive! Someone on the forum has used wire as a barrier to good effect, which may be easier