MTS Central Station III / MRC decoders

[stuart8286]

At present I'm using a Bachmann Dynamis DCC system controlling several Bachmann locos, these have MRC decoders fitted (AD322 & AD324's). I started with the Dynamis as a cheap start to digital along with the MRC decoders, I want to now advance up market regards DCC so are looking at the MTS Central Station III with the Dimax Navigator.
Therefore I'm seeking advice regards the MRC decoders, will they be suitable/compatable for the MTS etc. for the time being, or will they have to replaced immediately with another decoder.
Your advice and suggestions will be welcomed.

 

[Nemo]

MTS Central Station III with the Dimax Navigator.

Brilliant system, that's what I use. Couldn't tell you about the MRC decoders though

 

[stockers]

The MTS3 is generally NMRA compatible, so you should not have problems with the MRC decoders.
I personally use the MTS3 with the Navigator and thoughly recommend it. The navigator handset expand the MTS3 enormously. 10,000+ loco addresses, POM programming and a very usable keyboard amd screen. Loads of power at 5 amp.(I think the dynamis is 2.5 amps).Virtually bulletproof.
If anyone is running MTS3 without the Navigator then take a look - brilliant.
Recommended.