Massoth PC module + JMRI compatability

U

UKSGR

Registered
Country flag
Hi All

Question 1. Is the Massoth PC module needed for train control through the 1200Z if the 1200Z has a USB connection?

Question 2. Is the JMRI control software compatible with the Massoth system?

Thanks
 
1) No, the PC module is for decoder programming, sound and firmware updates (including Dimax bus components).

2) Not sure. The Massoth communication protocol is licensed. You would need to check the JMRI information to find out if it is supported.
 
Thanks Mark but I fear I may have not written the first question clearly. If I want to use computer control for my layout and my 1200z has a USB port, do I need the PC module?

For the JMRI answer I'll try them

Thanks
 
Re 2), no Massoth isn't supported by JMRI (or at least wasn't last time I checked) for the reason Mark mentioned above.

Some while ago there was talk on here (or GSM) as someone had approached Massoth for permission and documentation - for personal use only I think it was.
 
SGR said:
Thanks Mark but I fear I may have not written the first question clearly. If I want to use computer control for my layout and my 1200z has a USB port, do I need the PC module?

For the JMRI answer I'll try them

Thanks
Click to expand...
No.
 
ntpntpntp said:
Re 2), no Massoth isn't supported by JMRI (or at least wasn't last time I checked) for the reason Mark mentioned above.

Some while ago there was talk on here (or GSM) as someone had approached Massoth for permission and documentation - for personal use only I think it was.
Click to expand...

I have such a license and details of the protocol.
 
Has the licence and protocol ever been requested or released to JMRI?
 
You must log in or register to reply here.
Back
Top Bottom