LGB Spremberger question

P

playmofire

Registered
Country flag
Although I have a number of Playmobil steam outline tank locos and the Playmobil 4502 2-4-0 tender loco, my favourite loco is an early 2750 LGB Spremberger I bought some years ago off eBay for £80 with its nice, chunky businesslike shape.

I've been after another one for some time, but the price has shot up to silly levels, over £100 at times for an early version, plus I want one with the long projections on the cylinders intact. However, I recently bought one, again off eBay, for £94.95 from footplatetrains.

Like my first one, it runs well from the start but there are three of differences - the bell is silver instead of gold, the buffers have a white edging and there are a couple of terminals in the cab floor which the other doesn't have. Both are marked as made in Western Germany.

Any ideas as to what the terminals are for and year of manufacture would be appreciated.

Spremberger 2.JPG

Spremberger 2 cab.JPG
 
The long projections on the cylinder fronts are call tail-rods, and actually protected the projecting ends of the piston rod from weather and damage.
 
playmofire said:
Although I have a number of Playmobil steam outline tank locos and the Playmobil 4502 2-4-0 tender loco, my favourite loco is an early 2750 LGB Spremberger I bought some years ago off eBay for £80 with its nice, chunky businesslike shape.

I've been after another one for some time, but the price has shot up to silly levels, over £100 at times for an early version, plus I want one with the long projections on the cylinders intact. However, I recently bought one, again off eBay, for £94.95 from footplatetrains.

Like my first one, it runs well from the start but there are three of differences - the bell is silver instead of gold, the buffers have a white edging and there are a couple of terminals in the cab floor which the other doesn't have. Both are marked as made in Western Germany.

Any ideas as to what the terminals are for and year of manufacture would be appreciated.

View attachment 290848
Click to expand...

According to LOK it is a 2075 made between 1974 and 1982. The picture on p 79 of LOK shows the silver bell, white edging around the buffer and screw in the front. Looking at the LGB Kompendium vol 1 p 110 it could be edition 4 as the early editions had no bell, so likely to be an 80's model.
 
idlemarvel said:
According to LOK it is a 2075 made between 1974 and 1982. The picture on p 79 of LOK shows the silver bell, white edging around the buffer and screw in the front. Looking at the LGB Kompendium vol 1 p 110 it could be edition 4 as the early editions had no bell, so likely to be an 80's model.
Click to expand...
Thanks, Dave.
 
-bbbb said:
I have no idea what they are intended for, but it looks like they could be used to hold a figure in place.
Click to expand...
An interesting thought as I intend to add a crew. I think I may also do a light bulb test to see if they are live when power is fed to the loco's wheels.
 
Looks like a clamshell motor block. I've seen them with similar terminals atop them which make contact for lights, in some locos.
 
playmofire said:
An interesting thought as I intend to add a crew. I think I may also do a light bulb test to see if they are live when power is fed to the loco's wheels.
Click to expand...
A quick touch to one of the screws to each side of the wheels or skate with a Meter if you have one wound confirm that for you.
 
playmofire said:
An interesting thought as I intend to add a crew. I think I may also do a light bulb test to see if they are live when power is fed to the loco's wheels.
Click to expand...
if not terminals for a light, maybe terminals for a speaker, for some kind of sound?
 
You must log in or register to reply here.
Back
Top Bottom