LGB 65019 Mogul/Bachmann 4-6-0 kit bash.

John Fedak

Registered
2 Dec 2019
10
1
55
Ottawa Ontario
Country flag
Just throwing this out there. Has anyone used or know of someone who used a LGB 65019 Mogul motor/gear block in a kit bash with a Bachmann 4-6-0 loco for example? Or any other locomotive body?
Hints and any ideas are appreciated.
 

Attachments

  • 65019.jpg
    65019.jpg
    29.3 KB · Views: 0

philg

Registered
28 Nov 2009
107
8
Country flag
Yes, I used one to build this, which is described in a thread elsewhere on the site. The LGB 65019 was described as a "gearbox" and I believe only available in the American market. It's now discontinued, I think, which is a great shame as I could use a couple more of them

Phil
P1070305.jpg
 
  • Like
Reactions: 1 user

John Fedak

Registered
2 Dec 2019
10
1
55
Ottawa Ontario
Country flag
I came across one on Ebay "previously owned" just not used much if at all. Anyway I think it will be a great project to work on like yours was.
 

Dan

Registered
28 Jan 2010
422
36
Eastern MA
Country flag
And this unit when I bought it had the rear wheel chuff sensor.
 

geofc

Queensland Railways
27 Jul 2012
58
1
72
Sydney
www.trainweb.org
Country flag
Just throwing this out there. Has anyone used or know of someone who used a LGB 65019 Mogul motor/gear block in a kit bash with a Bachmann 4-6-0 loco for example? Or any other locomotive body?
Hints and any ideas are appreciated.
Here is what I did with a Bachmann Big Hauler, On board battery, 2.4GHh Tx/Rx, ESC.
 

Attachments

  • How I Kitbashed it.pdf
    1.4 MB · Views: 0
  • Like
Reactions: 1 user