Lgb 5029 Signal
- Thread starter Jayarmin
- Start date
Guess the three wire terminal input of the 5029 is the stumbling block?
Sorry for the quality of the picture, still struggling with movement from the recent procedure on my right shoulder.
In essence, a pair of diodes are required, to covert the three wire input to a two wire connection.
Suggest using a Wago or Choc Block connector to experiment with the correct orientation of the two diodes, prior to making a permanent connection.
Sorry for the quality of the picture, still struggling with movement from the recent procedure on my right shoulder.
In essence, a pair of diodes are required, to covert the three wire input to a two wire connection.
Suggest using a Wago or Choc Block connector to experiment with the correct orientation of the two diodes, prior to making a permanent connection.
-
2
- Show all
Center post is common on these older units. Colors on the terminals match the colors on the 5075/5175 boxes.