I have the track cleaning loco and it was working perfectly up till i put it on my programming track and hit the wrong button. Can anyone help me find the default CV values for this locomotive? It wasn't cheap and I"m really kicking myself for not being more careful.
LGB 20670 MTS booboo
- Thread starter Ryman76
- Start date
You can find the instructions here:
http://www.champex-linden.de/lgb_pr...935A228525693000715476/$FILE/20670_022003.pdf
Normally you can force a factory reset by writing a value of 55 to CV 55
http://www.champex-linden.de/lgb_pr...935A228525693000715476/$FILE/20670_022003.pdf
Normally you can force a factory reset by writing a value of 55 to CV 55
Refer this posting,
http://www.gscalecentral.net/m156003
A friend still cannot read his latest release digital track cleaner. Basically, he has to do single CV read and write. The Massoth programmer and latest release Massoth programme do not identify the decoder fitted (presumably a LGB large onboard). When he had the LGB programmer it also could not read/identify the decoder.
http://www.gscalecentral.net/m156003
A friend still cannot read his latest release digital track cleaner. Basically, he has to do single CV read and write. The Massoth programmer and latest release Massoth programme do not identify the decoder fitted (presumably a LGB large onboard). When he had the LGB programmer it also could not read/identify the decoder.
I did try to set cv55 to 55 and it didn't work. I did see in the other thread the cleaning motors need to be off so I assume that means the swtich needs to be in position 0.
The PDF is awesome, but there are some things missing from the PDF like the voltages for the lights and the F1.
The PDF is awesome, but there are some things missing from the PDF like the voltages for the lights and the F1.
