Lazy Grange Bay 3...a new start

[mike]

 

[PhilP]

Granville!
Fer..fer..fer.. Fetch a cloth!

 

[mike]

Well, I got back to my wearhouse, it's going to be situated on a raised platform, next to the cannel and in front of the goods shed, and yes it will have a loading Dock.

 

[mike]

And as of today...

 

[PaulRhB]

You have dedication to scribe all those!

 

[mike]

Well with the nicer weather the office moved out doors.. And progress was made on the rear wall.. Over 80%will be hidden but we know the details are there, (and so do the voices), after a trail fit on site, all be it very loosely.. We feel confident... ISH...
Last one is of the rear, were the loading Dock will be...

 

[mike]

And of course train were running while we plodded on... Jenny & rihita were out on passenger duties, all day.. Faultlessly running from 9 till 5..

 

[PhilP]

Health and Safety! - Better fence-off those two manholes, just outside the main door!

Why is that loco being fired with dead sheep?

 

[mike]

We is recycling dead sheep as fuel..
Green you see
Started today as assembly day.. Fingers crossed it fits..

 

[mike]

And trains ran too..

 

[Rhinochugger]

Why is that loco being fired with dead sheep?

 

[Paul M]

Health and Safety! - Better fence-off those two manholes, just outside the main door!

Why is that loco being fired with dead sheep?

He's too kindhearted to use live ones

 

[PhilP]

That building is HUGE!

Is it greater than 750x750mm footprint, I wonder?

 

[Rhinochugger]

That building is HUGE!

Is it greater than 750x750mm footprint, I wonder?

Well, it's bigger than Mike

 

[mike]

38 inch x 32 inch roughly... But not square as its a triangle...
Yes but then everything is!!!
Rear wall detailing, doing the loading bay doors shut for now as there's enough to be done, to get it weather tight, so it can live out side, details like the loading Dock and its interior will be added l

 

[mike]

Well, there is a lot still to do, adding more levels of details, jenny thought I'd gone mad and treated her to a new kitchen bin, but I use of the old bins inner plastic bucket.. As a roof surport. Needs cutting down... Started on roof..

 

[Gizzy]

The board you are using Mike.

Can you bend it? I want to make bridge buttresses where my track curves....

 

[mike]

The board you are using Mike.

Can you bend it? I want to make bridge buttresses where my track curves....

Hi Gary, yes it bends, look at the viaduct, or my bridge buttresses.. Its very easy to use.. Make a internal former and glue it to it

 

[mike]

Summer has I think... Landed and the Wear house is coming together. Roof is 6mm thick foamex and so is the base..

 

[PhilP]

So realistic, with that arch filled with the red-brick.. Didn't know the layout went that far?