Diesel2000
Registered

I have a CS3+ and use a Massoth booster to get 2.5x the power. I have the layout carved into power districts using circuit breakers so no area is getting more than 7 amps. Recently I started another expansion and decided to use the 5amps from the CS3 to power the additions. I have found there to be hesitation from locos as they pass from the Massoth booster districts to the CS3 district. Has anyone experienced this or tried this set up?
The CS3 puts out 22V and typically I've run the Massoth booster at 20V. I've tried it at 22V but there is no difference.
The CS3 puts out 22V and typically I've run the Massoth booster at 20V. I've tried it at 22V but there is no difference.