I'm pretty sure the Main Line at Thurby is level, Greggrades please?
remember that locos share the load so amperage for 2 locos pulling a train is just about the same total as one.
But you added smoke, that's a half amp per unit.... looks level, and 7 h/w cars... plus sound at amp each...
so I would guess 2.5 to 3 amps per loco, times 4... so 10 to 12 amps would be my guess... could be a little less, that's not much of a load, and I'm guessing on the sound cards, if a Phoenix, then 1 amp is around right, but will be less for others.
Greg
I'm pretty sure the Main Line at Thurby is level, Greg![]()
the locos asked about were usa trains, motors much different than buhler, and their smoke units draw more current... fan driven...
so what was the reason for the question?
Greg
Yes, USA trains are notoriously greedy beaststhe locos asked about were usa trains, motors much different than buhler, and their smoke units draw more current... fan driven...
so what was the reason for the question?
Greg