flexitrack

C

craigrailinc

Registered
Country flag
Looking for some help to straighten out flexitrack which has been bent to R3 curves in 5 foot lengths. I've tried the round the waist trick but it curls back round?!
would it hold straight as it will be screwed to the base board??
any helpful suggestions welcome
:thumbup:
 
Is it possible that it's been rolled with a rail bender? If so it'll probably need the same in the reverse direction. That'll cure it anyway. They can be hired if necessary.
 
bobg said:
Is it possible that it's been rolled with a rail bender? If so it'll probably need the same in the reverse direction. That'll cure it anyway. They can be hired if necessary.
Click to expand...
it may well have been as it looks pretty uniform, any idea where I can hire one from?
 
craigrailinc said:
bobg said:
Is it possible that it's been rolled with a rail bender? If so it'll probably need the same in the reverse direction. That'll cure it anyway. They can be hired if necessary.
Click to expand...
it may well have been as it looks pretty uniform, any idea where I can hire one from?
Click to expand...
Are you in the G Scale Society? If you have a local group, they may have access to one?
 
Steve of Back 2 Bay 6 shows them on his website for hire.
 
Tony said:
Is it LGB flexy cos if so it should shapen very easy and be quite loose
I know its adaft question but is it USA trains or Aristo that have the little screws in underneath securing the rail to the sleeper section if so remove them

TONY
Click to expand...
Thanks Tony
its LGB and it does move easily, it just creeps back to shape
 
You must log in or register to reply here.
Back
Top Bottom