Dead loco.

[Anglian]

I have an LGB V52 901 (23510), which has always behaved impeccably, but now is unresponsive. The shoes are all in contact, the lights respond to the 9 button but that's it. I have tried it with another assigned number but that didn't work either All the other engines are fine. Any suggestions please?
Trevor

 

[PhilP]

I assume you have checked the switch is fully on?

 

[Anglian]

I assume you have checked the switch is fully on?

Hi Phil. I posted in the Coffee Lounge that having had a read through a PDF manual, I remembered about the switch. I had of course moved it when picking the engine up. You can only laugh.
Thanks for responding.
Trevor

 

[dunnyrail]

Hi Phil. I posted in the Coffee Lounge that having had a read through a PDF manual, I remembered about the switch. I had of course moved it when picking the engine up. You can only laugh.
Thanks for responding.
Trevor

At least a happy result, we have all done it!

 

[Paul M]

You can only laugh.

We are . Mind you, I've bet we've ALL done something similar

 

[Hal Farsed]

At least there was no expensive blue smoke ;-)

 

[KeithT]

Hi Phil. I posted in the Coffee Lounge that having had a read through a PDF manual, I remembered about the switch. I had of course moved it when picking the engine up. You can only laugh.
Thanks for responding.
Trevor

Lucky you, I had the expensive version, one burnt out motor.

 

[Dan]

Engines do not work properly if the speed steps in the engine do not match the command system. Since you state F9 for the lights I assume LGB MTS which is 14 speed steps and CV 29 needs to be 4 for DC and DCC 14 speed steps.