Changing Piko Decoder loco address

[DRG11]

Hi All,

I have 2 Piko locos fitted with there own sound decoders (class 50 and BR106), does anybody know if and how to alter the loco addresses using the Massoth system as I cannot work it out at all,

Many thanks.

 

[Gizzy]

I couldn't work out how to change addresses on the Navigator either, so I brought the software/hardware from P&S.

Much easier to do on the PC....

 

[dunnyrail]

Changing CV’s on the navi a bit of an art but entirely possible, the instructions are not intuative and take a few reads to fully understand following through the pages.

Key to doing it is to remember that the menu Line bottom blacked line on the Navi screen changes at each instruction. It is so easy to ignore that next instruction.

Also set up up programming track with a piece of rail a bit longer than the locomotive, there is a separate output on the back if the Base Station for this.