Bridge over fish pond

[gamecoder.nz]

Hi everyone,

I am going to have a curved bridge over a goldfish pond and the pond will be 1.5m deep from the base of the bridge. What could I use to support the bridge over the water?

 

[John Randall]

If running live steam do not let oil dribble into the pond !

 

[maxi-model]

Use a deep "undergirder" constuction for the bridge deck. Add side fences or railings incase of mishaps. And check rails to the track. Then use a single pillar to support bridge, on its centreline, where apex of the bridge's curve is. Firmly fix that pillar into a foundation in pond. Ensure good foundations and fixings are provided at bridge's ends into the banks of the pond and linked trackage. Max

 

[gamecoder.nz]

Use a deep "undergirder" constuction for the bridge deck. Add side fences or railings incase of mishaps. And check rails to the track. Then use a single pillar to support bridge, on its centreline, where apex of the bridge's curve is. Firmly fix that pillar into a foundation in pond. Ensure good foundations and fixings are provided at bridge's ends into the banks of the pond and linked trackage. Max

Thank you for that. I've tried searching but I can't find an undergirder tall enough. How can I build one?