Was wondering if anybody could shed some light on a problem I have. My layout is dcc using massoth dimax 1210z equipment and navigator. All my LGB and Piko trains are fitted with massoth decoders and run fine but the Thomas range for my kids seems to have problems. I have fitted james and percy with again massoth decoders all run fine. Thomas and Emily are fitted with the Bachmann LS soundtraxx decoders and they seem to play up. What we find is they will move of fine then if they come across a slightly dirty bit of track stop then stutter a bit then stop then wont move any more until you stop the train on the navigator and then reapply the throttle. Its just so odd as percy will go over the same track no problems at all. They have done this from new straight out the box. Any thoughts as don't want to loose the sounds as my little boy loves the trains but he gets upset because Thomas just keeps stopping and starting. I was thinking of sticking a second decoder in ie massoth to just run the motor and leave the soundtraxx card for the sounds just seems a waste of money. So does anyone have any views on the soundtraxx cards and if they have had the same problems would be great to here any ideas to fix this
Many thanks
Adam
Many thanks
Adam