Alpineandy
Registered
Okay this one's been on the back burner for while now so I finally got my finger out to finish it......................
Baby Garrett
- Thread starter Alpineandy
- Start date
Rhinochugger
Retired Oik
That's one of the best I've seen - nice proportions 
Riograndad
Model Railroading, boats and oil painting,
A little cracker
Paradise
Registered
Well done! Can I please have your Ottograph mister?
The LGB Toy Trains are a little on the wussy side so a X2 version will get things chugging along much better.
I actually have a spare Otto around somewhere...
Although different, these little Garratts in Argentina intrigue me. Only about 7.5 mtrs long an 1.6 meters wide. (Note they only have two articulated sections rather than the Garratt's three )
Modern Steam Photos
The LGB Toy Trains are a little on the wussy side so a X2 version will get things chugging along much better.
I actually have a spare Otto around somewhere...
Although different, these little Garratts in Argentina intrigue me. Only about 7.5 mtrs long an 1.6 meters wide. (Note they only have two articulated sections rather than the Garratt's three )
Modern Steam Photos
Interesting little beasties. I think they may have developed a New Loco Type as Garrett is probably not the right name for these I feel, perhaps ‘2 section Gattetts ‘for the time being may work well. I feel a controversial letter comming on to the Steam Railway Press.Well done! Can I please have your Ottograph mister?
The LGB Toy Trains are a little on the wussy side so a X2 version will get things chugging along much better.
I actually have a spare Otto around somewhere...
Although different, these little Garratts in Argentina intrigue me. Only about 7.5 mtrs long an 1.6 meters wide. (Note they only have two articulated sections rather than the Garratt's three )
Modern Steam Photos
idlemarvel
Neither idle nor a marvel
I think they are called Union Garretts if the boiler firebox and coal bunker are joined.
Paradise
Registered
If anyone is interested in a load for a HO flatcar. The little red Argentinian Garratt Zubieta is available on eBay as a static model on a removable plinth, 9mm gauge. Reasonably sharp detail for only a few dollars delivered from China.
There is also the Darjeeling B class weird thing and 2 European diseasels.
They would even make nice cake decorations for train lovers.
Oh gee! Only 1 Zubieta left.
Nostalgic Train model ntm0102 ARGENTINA No.2 Ing. Zubieta | eBay
I'm glad I snapped a few up now. These opportunities come then go for good.
There is also the Darjeeling B class weird thing and 2 European diseasels.
They would even make nice cake decorations for train lovers.
Oh gee! Only 1 Zubieta left.
Nostalgic Train model ntm0102 ARGENTINA No.2 Ing. Zubieta | eBay
I'm glad I snapped a few up now. These opportunities come then go for good.
G-force1
Prevarication Rules!
Well done! Can I please have your Ottograph mister?
The LGB Toy Trains are a little on the wussy side so a X2 version will get things chugging along much better.
I actually have a spare Otto around somewhere...
Although different, these little Garratts in Argentina intrigue me. Only about 7.5 mtrs long an 1.6 meters wide. (Note they only have two articulated sections rather than the Garratt's three )
Modern Steam Photos
The single articulation must restrict the turn radius considerably, but definitely an interesting concept. Must have been done before as nothing is new under the sun, but what it should be called escapes me. Union Garratt could be right.
Another thought, are the rear trucks(?) pivoted under the chassis? That would improve the turning Radius quite a bit.
Whar's the source of the Argentinian 'Garratt' picture?
If could find more pictures, without a loco in the way, it may answer some of the questions..
Wicked-pedia helps a little:
Modified Fairlie locomotives[edit]
The Modified Fairlie was first introduced in South Africa, when the South African Railways (SAR) experimented with a modified type of Fairlie locomotive in order to compare the concept to that of the Garratt locomotive in terms of actual performance and maintenance requirements. In essence, the Modified Fairlie was an adaptation of the Kitson-Meyer concept. It was similar in appearance to a Garratt, but with the boiler, cab, coal and water bunkers all mounted on a single rigid frame which pivoted on the engine units, with the pivot centers located approximately at the centre of the rigid wheelbase of each engine unit. In the Garratt design, by comparison, the coal and water bunkers are mounted directly on the engine units and swivel with them, while the boiler, firebox and cab are mounted on a rigid frame which is suspended between the two engine units.[3][4][5][6]
Union Garratt locomotives[edit]
The Union Garratt was a hybrid locomotive, part Garratt and part Modified Fairlie, designed and built for the SAR by Maffei in Munich, Germany. The front end of the locomotive was of a typical Garratt arrangement, with a water tank mounted on the front engine unit’s frame, while the rear end was constructed in the Modified Fairlie fashion, with the coal bunker mounted on a rigid extension of the locomotive’s main frame and with the pivoting rear engine unit positioned beneath the coal bunker.[3][4
If could find more pictures, without a loco in the way, it may answer some of the questions..
Wicked-pedia helps a little:
Modified Fairlie locomotives[edit]
The Modified Fairlie was first introduced in South Africa, when the South African Railways (SAR) experimented with a modified type of Fairlie locomotive in order to compare the concept to that of the Garratt locomotive in terms of actual performance and maintenance requirements. In essence, the Modified Fairlie was an adaptation of the Kitson-Meyer concept. It was similar in appearance to a Garratt, but with the boiler, cab, coal and water bunkers all mounted on a single rigid frame which pivoted on the engine units, with the pivot centers located approximately at the centre of the rigid wheelbase of each engine unit. In the Garratt design, by comparison, the coal and water bunkers are mounted directly on the engine units and swivel with them, while the boiler, firebox and cab are mounted on a rigid frame which is suspended between the two engine units.[3][4][5][6]
Union Garratt locomotives[edit]
The Union Garratt was a hybrid locomotive, part Garratt and part Modified Fairlie, designed and built for the SAR by Maffei in Munich, Germany. The front end of the locomotive was of a typical Garratt arrangement, with a water tank mounted on the front engine unit’s frame, while the rear end was constructed in the Modified Fairlie fashion, with the coal bunker mounted on a rigid extension of the locomotive’s main frame and with the pivoting rear engine unit positioned beneath the coal bunker.[3][4
