What happened at your workbench today?

3 minutes of fame

3d printing, electronics and trams
14 Dec 2020
574
154
Lincolnshire
www.mgnr.uk
Best answers
0
Country flag
A busy weekend, so not much progress with anything, but I did finish my latest design, a narrow version of my tipper wagon. These are laser cut with 3d printed wheels, with just the bearings bought in. They can be built to 32mm or 45mm by adjusting the length of the axle spacing tube. 20211011_154113.jpg
 

The Shed

Citizen of the Republic of the North East.
8 Mar 2020
1,064
238
Darlington, County Durham.
Country
England
Best answers
0
P playmofire

Printed a few more, sprayed one with primer, shows up in the picture better.

Reprints Raleigh Logo.jpg
 

3 minutes of fame

3d printing, electronics and trams
14 Dec 2020
574
154
Lincolnshire
www.mgnr.uk
Best answers
0
Country flag
P playmofire

Printed a few more, sprayed one with primer, shows up in the picture better.

View attachment 291058
I think it should be possible to improve the quality of those. It looks like there's a bit of over extrusion or perhaps the retraction needs increasing. Failing that, maybe a clean up of the original file would help?
 

Gérard Baudoin

Registered
13 Jan 2021
90
12
72
Bretagne - France -Europe
Best answers
0
Country flag
for Gérard Baudoin and other people interested in this question !
The initial home town of Peugeot is in Sochaux.
Sochaux is in the so called région Franche Comté in France.
The Franche Comté emblem is a lion.

I am now in Toulouse area but my family originated from Franche Comté and particularly close to Sochaux.
Several members of my family worked by Peugeot.
Bonjour. I didn't know about the emblem of Franche Conté. I remember my father told us he had to go to Sochaux to buy his first new car in the 1950 (From Brittany!) She was a 203. then a 403, then a "Versailles".
 

3 minutes of fame

3d printing, electronics and trams
14 Dec 2020
574
154
Lincolnshire
www.mgnr.uk
Best answers
0
Country flag
Today's challenge, a chauldron to pull behind my Rocket model. Probably one of the smallest 1/32 models one can make! Designed this morning, printed and laser cut over lunch and assembled this evening.

20211012_231938.jpg
 

ARIA31

Registered
3 Oct 2017
250
54
74
Toulouse - France
Best answers
0
Country flag
Today I repaired my USA trains depressed center flat car. As many other G Scaler I broke one of the brake wheel support.
After having tried glue which failed , I found another solution with 2 nails.
The first step was to bore the 4 holes 1.5 mm with care to make sure the support will be well aligned.
Fortunately it worked fine....

P1220919red.jpg

P1220927.red.jpg
 

JimmyB

Now retired - trains and fishing
23 Feb 2018
6,893
910
69
Weston-super-Mare
www.tumble-down-falls.co.uk
Best answers
0
Country flag
Today I repaired my USA trains depressed center flat car. As many other G Scaler I broke one of the brake wheel support.
After having tried glue which failed , I found another solution with 2 nails.
The first step was to bore the 4 holes 1.5 mm with care to make sure the support will be well aligned.
Fortunately it worked fine....
Good solution, though i may have used a couple of small 10/12 BA nuts and bolts, but as long as it works for you :)
 

playmofire

Registered
23 Oct 2010
8,249
853
80
North Yorks
Best answers
0
Country flag
Yesterday at my workbench (a wobbly kitchen table in what passes for a conservatory, built so poorly for the previous owner of our place that there wasn't even sealing between the edges of the conservator and the wall) I started experimenting with reroofing my LGB Toy Train goods vans.

I like these short vans but would like a more European/UK roof line, i.e. curved rather than the present central walkway and angled roof line either side. (The end ladders on the van body don't bother me greatly and I will either leave them, or box them over in whole or in part. I know they can be cut off and the ends rescored for the planking, but I'm wanting to run stock rather than spend a lot of time altering it.) I have 10 of these goods vans (I think that's right, but the total could be one or two more), and I have thought of maybe having a 3D-printed roof made. Any takers out there?)

Anyway, back to the workbench.

David1226 has kindly provided me with six roofs surplus to his needs, but for a first run I used a roof from a weathered van off eBay.

Tools and materials first, a razor saw and a sheet of Evergreen Metal Roofing. There are very fine strips in the latter pack to fix in the pre-cut grooves, but these can be discarded. The pre-cut grooves make it easy to shape the roof and will probably mean it will hold its shape better once glued in place.

1 Tools.JPG

2 Product.JPG

First. cut off the overhang of the central walkway at each end, smoothing the cut end as required.
3 Job.JPG4 One end.JPG
Then slice off the ventilators at each end of the roof. A bit of sanding might be needed to remove all traces but isn't really important.
5 Done.JPG
5 Finished job.JPG
A trial fitting, firstly with a spacer between the walkway and the new roof and then without. I shall try removing the walkway entirely as well.
7 With spacer.JPG
6 No spacer.JPG
Clearly, there is a need for filling of some sort between the new roof and the old roof, so room for experimentation.

Lastly, an overall impression.
8 First impressions.JPG

I think more of an overhang at each side is needed but if I remove the central walkway, that may give the extra overhang needed.
 
Last edited:

SevenOfDiamonds

Registered
3 Jan 2010
493
109
Best answers
0
Country flag
I like these short vans but would like a more European/UK roof line, i.e. curved rather than the present central walkway and angled roof line either side
There is always more than one way to achieve the same outcome but I do wonder whether trying to achieve a curved roof using the original "American-style" roof is necessarily the best starting point.

Like you I have a number of the ToyTrain box vans and I also wanted to "anglicise" them. At the time, Garden Railway Specialists offered a number of conversion kits for ToyTrain wagons, and one of these achieved what I wanted. It consisted of a pre-curved piece of thick plasticard (113 x 230mm), two rectangles of thinner plasticard with a template to shape the top edge to match the curve of the roof, two vacuum-formed roof supports (for sticking to the underside of the roof to slot inside the body) and two ventilators.

1634201403141.png1634201429581.png

They stopped producing this"kit" some time ago but still offer the "Moulded Roof Supports" (SG1108), the ventilators (SG1128}, and a number of curved roofs (though most are not wide enough for this task).

On other wagons, I have fabricated a roof from scratch and topped it with "corregated iron sheet" also from GRS (LSA2, but I can't find it on their website today). This comes (came?) as a vacuum-formed sheet with two separate corrugated strips each of 405 x 113mm (so enough for three wagon roofs if you are prepared to join two bits together for the third one).

1634202218234.png1634202265840.png

Of course, another method of creating a curved roof is to make it up from a number of narrow strips attached to an arched former. ge-rik (of this forum) has described this process (on the same wagon as yours!) on his blog (How I converted an LGB US style box car into a UK style closed van).

Food for thought?

All the best

David
 
Last edited:
  • Like
Reactions: 1 user

playmofire

Registered
23 Oct 2010
8,249
853
80
North Yorks
Best answers
0
Country flag
There is always more than one way to achieve the same outcome but I do wonder whether trying to achieve a curved roof using the original "American-style" roof is necessarily the best starting point.

Like you I have a number of the ToyTrain box vans and I also wanted to "anglicise" them. At the time, Garden Railway Specialists offered a number of conversion kits for ToyTrain wagons, and one of these achieved what I wanted. It consisted of a pre-curved piece of thick plasticard (113 x 230mm), two rectangles of thinner plasticard with a template to shape the top edge to match the curve of the roof, two vacuum-formed roof supports (for sticking to the underside of the roof to slot inside the body) and two ventilators.

View attachment 291168View attachment 291169

They stopped producing this"kit" some time ago but still offer the "Moulded Roof Supports" (SG1108), the ventilators (SG1128}, and a number of curved roofs (though most are not wide enough for this task).

On other wagons, I have fabricated a roof from scratch and topped it with "corregated iron sheet" also from GRS (LSA2, but I can't find it on their website today). This comes (came?) as a vacuum-formed sheet with two separate corrugated strips each of 405 x 113mm (so enough for three wagon roofs if you are prepared to join two bits together for the third one).

View attachment 291173View attachment 291174

Of course, another method of creating a curved roof is to make it up from a number of narrow strips attached to an arched former. ge-rik (of this forum) has described this process (on the same wagon as yours!) on his blog (How I converted an LGB US style box car into a UK style closed van).

Food for thought?

All the best

David
Much useful info there, David. Off now to GRS to search out what you mention. Their kits would have been my preferred option if they were still available.
 

3 minutes of fame

3d printing, electronics and trams
14 Dec 2020
574
154
Lincolnshire
www.mgnr.uk
Best answers
0
Country flag
If it's of interest, I can laser cut roofs from 2mm ply, with the planking half cut, so bending to shape is easy. I've done this on my home built wagons and the end effect is excellent.

The one below has just been painted without any sanding or filler, but a layer of tissue will give a very realistic canvas finish. 20211014_161848.jpg20211014_161840.jpg
 

playmofire

Registered
23 Oct 2010
8,249
853
80
North Yorks
Best answers
0
Country flag
If it's of interest, I can laser cut roofs from 2mm ply, with the planking half cut, so bending to shape is easy. I've done this on my home built wagons and the end effect is excellent.

The one below has just been painted without any sanding or filler, but a layer of tissue will give a very realistic canvas finish. View attachment 291193View attachment 291194
Conversation started.
 

JimmyB

Now retired - trains and fishing
23 Feb 2018
6,893
910
69
Weston-super-Mare
www.tumble-down-falls.co.uk
Best answers
0
Country flag
Currently I have 3 things on the go on my work bench:
  • Pola Garden Shed, my first Pola building and very impressed so far.
Shed-01.jpg
  • A Timpdon 2 Compartment Coach
Coach-03.jpg
  • Bachmann Tram conversion to battery RC
Tram-01.jpg

Just arrived a Kippo Signal Box, not started yet :)
 

Paul M

Registered
25 Oct 2016
11,789
1,687
60
Royston
Best answers
0
Country flag

Chris Vernell

Tortoise
24 Oct 2009
8,997
1,803
77
Nepean, ON
Country
Canada
Best answers
0
Country flag
First, I must find my bench in the dungeon depths. This quest will require the assistance of a mage, a cleric, a hero and a thief.
Second, I must unsheath my vorpal blade and battle Shelob's offspring.
Third, should I survive, I must find the dark materials for the projects I have in mind. Further arachnid armageddon is anticipated.
Fourth ... now what was it I came in for? o_O
Time to go and lie down.
 

DafyddElvy

1:22.5 & 15mm Scale Trams, , NG Steam Railways
10 Feb 2021
981
96
West Lothian
Country
Scotland
Best answers
0
Country flag
Something a little different.

Like I'm guessing a few others I break modern plastic tools occasionally.
I need to fix a clamp on which the draw in handle (for want of a better word) so I could use the clamp to hold parts of the next baseboard while I glue and screw them, the tube forming the new handle is recycled from a defunct garden light flower thingy.

Time will tell if this fix becomes permanent, or this ham fisted modeller breaks it again.

David
 

Attachments

  • 20211109_221232.jpg
    20211109_221232.jpg
    146.2 KB · Views: 0

Southwestforests

Registered
2 Nov 2021
212
46
60
Missouri
Best answers
0
Country flag
What happened at my workbench last night was that I knocked over the bottle of what is left of my PollyScale 'steam power black' paint
and in what I'm going to classify as a minor miracle it stopped just short of flowing over the the proverbial "kitchen table's edge on to the apartment carpet.
:eek: :whew: :clap:
This time the sad fact of it almost being all used up and being irreplaceable saved me from damaging someone else's property.

The other minor miracle is that the paint is still good after at least 15 years!
 
  • Wow
Reactions: 1 user