Brixham
No buffers were hurt at this sign
Epoxy resin on the wooden bits, liquid poly everywhere else, and it's almost a single shot, as the liquid poly dries quite quickly. I used rubber bands to apply pressure, with more coffee stirrers to spread the force.
Once this was set, I added the drip rails, fixing at both ends first, then working along to the centre.
Both the roof and drip rails were cut oversize, then trimmed to fit once set.
Now to the paint shop again....although if I had thought, it would be easier to do all the construction first, then paint grey, then mask the body, and spray the roof.
Oh well...next time!
