Speed step wont change!And more!!!

M

Mez

Registered
Hi
On an LGB loco.
Probably doing something silly but i changed my loco address and speed steps.
Loco address changed ok
Speed step stays at 28.
I want 14.
plus since re naming address the bell sound does not work.
On another loco all sounds have gone since i changed the address
Help!
Steve
 
What loco?
What decoder?
What CVs did you try and change?
 
Re:Speed step wont change!And more!!!

decoder=?&:(Its got lok
on the tender connection
lgb 26194
Just tried changing it on the Navi in the first part of address.
Did not change cv yet
 
Re:Speed step wont change!And more!!!

I discovered the hard way that a factory reset wiped the sounds on an ESU chip.
I suspect that you'll need the use of ESU's interface and software to sort it.
I have very little experience of DCC but if you don't get advice from those more experienced than me I suggest you give the U.K. agents a call.
http://www.southwestdigital.co.uk/
 
Re:Speed step wont change!And more!!!

Neil Robinson said:
I discovered the hard way that a factory reset wiped the sounds on an ESU chip.
I suspect that you'll need the use of ESU's interface and software to sort it.
I have very little experience of DCC but if you don't get advice from those more experienced than me I suggest you give the U.K. agents a call.
http://www.southwestdigital.co.uk/
Click to expand...

Neil Ii think you will find it is factory fitted sound. I think the sound unit won't function above 22. Try a factory reset
 
Re:Speed step wont change!And more!!!

Philbahn said:
Neil I think you will find it is factory fitted sound. I think the sound unit won't function above 22. Try a factory reset
Click to expand...

I hope you're right Phil. When Mez said it had loksound on the tender I thought that may infer an ESU chip.
 
Re:Speed step wont change!And more!!!

Neil Robinson said:
Philbahn said:
Neil I think you will find it is factory fitted sound. I think the sound unit won't function above 22. Try a factory reset
Click to expand...

I hope you're right Phil. When Mez said it had loksound on the tender I thought that may infer an ESU chip.
Click to expand...
That threw me as well Neil. Went on champex site and that number says factory fitted sound
 
Re:Speed step wont change!And more!!!

Neil Robinson said:
Philbahn said:
Neil I think you will find it is factory fitted sound. I think the sound unit won't function above 22. Try a factory reset
Click to expand...

I hope you're right Phil. When Mez said it had loksound on the tender I thought that may infer an ESU chip.
Click to expand...

Just Lok
 
Re:Speed step wont change!And more!!!

Right..
Its been reset with no joy.
Ive taken it apart.
Checked connectivity between chip and tender all ok.
Stuck again now!!
 
Re:Speed step wont change!And more!!!

Mez, are U using a Navigator to do this?
 
Re:Speed step wont change!And more!!!

are you trying to change the speed steps on the same screen as the loco code number?
 
Re:Speed step wont change!And more!!!

No.
Im just wanting to hear a noise.
Its all been reset to factory settings.
 
Re:Speed step wont change!And more!!!

Mez have not forgot you. It is supposed to be a factory fitted sound unit>Is it? Have you done a general reset CV55 value 55. Don't know what that will do on a massoth reset haven't tried it
 
Re:Speed step wont change!And more!!!

I went to meet Muns and malcolm today.
We reset it all on muns lappy.
I looked at some images and it looks like factory sound.
The coal box still works!!!!!!!! LOL
 
Re:Speed step wont change!And more!!!

Mez said:
I went to meet Muns and malcolm today.
We reset it all on muns lappy.
I looked at some images and it looks like factory sound.
The coal box still works!!!!!!!! LOL
Click to expand...

Was that on the LGB system.or what?
 
Re:Speed step wont change!And more!!!

Philbahn said:
Mez said:
I went to meet Muns and malcolm today.
We reset it all on muns lappy.
I looked at some images and it looks like factory sound.
The coal box still works!!!!!!!! LOL
Click to expand...

Was that on the LGB system.or what?
Click to expand...

Yes. lgb
Should i try it on mineee?
 
You must log in or register to reply here.
Back
Top Bottom