frankando12
Registered
Hi.
I am trying to reprogram a 55025 LGB Switch Decoder that has been set to terminals ( 9-12). I am trying to change It to (13-16) with my Piko Navigator. I have the "in" terminals connected to a test track connection, I have bridged the "Prog" Terminals and set a switch to terminal A . I set the navigator to the "Decoder Progr" CV-1 set to 13 and press OK. I then get a X next to 13 . I have tried setting CV1 to 14-15-and 16 still get a X. . The decoder will still works on terminals 9-12. Am I reading the Post on programing 55025 switch decoder wrong . Do I need to change something else. Thanks Frank
I am trying to reprogram a 55025 LGB Switch Decoder that has been set to terminals ( 9-12). I am trying to change It to (13-16) with my Piko Navigator. I have the "in" terminals connected to a test track connection, I have bridged the "Prog" Terminals and set a switch to terminal A . I set the navigator to the "Decoder Progr" CV-1 set to 13 and press OK. I then get a X next to 13 . I have tried setting CV1 to 14-15-and 16 still get a X. . The decoder will still works on terminals 9-12. Am I reading the Post on programing 55025 switch decoder wrong . Do I need to change something else. Thanks Frank