A simple question for any that have the NCE 10 amp DCC system. I have a LGB loco with factory 'serial' digital sound to which I fitted a Massoth 'L' decoder (direct decoder installation). I activated CV 49 to accept serial and parallel data transfer plus fast serial pulse strings. The sound on the loco responded to function key number inputs when using my Piko/Massoth setup.
Now with my replacement NCE setup, when triggering sounds, the cab only accepts serial inputs, much like the early MTS. To activate sound function '5' for instance, button '1' must be pressed five times. I believe the NCE system will accept only parallel input. Can a NCE user advise if there is a work around to get the cab to accept fast serial pulse strings and enable cab button input to trigger sounds? My LGB #65001 sound decoder responds to the cab button inputs when triggering sounds.
Now with my replacement NCE setup, when triggering sounds, the cab only accepts serial inputs, much like the early MTS. To activate sound function '5' for instance, button '1' must be pressed five times. I believe the NCE system will accept only parallel input. Can a NCE user advise if there is a work around to get the cab to accept fast serial pulse strings and enable cab button input to trigger sounds? My LGB #65001 sound decoder responds to the cab button inputs when triggering sounds.