Navigators

[mradd]

Hello All,

I currently have 3 Massoth Navigators, all #8134501, which can/and are used wireless and Im looking at getting another navigator.

As the new ones are all 2.4gh these are no use to me unless I also change the 3 I have over, so does anybody know if the Piko Navigator #35017 can be used with the Massoth system without any changes being made ?.

If not does anybody know if the Massoth Navigator #8134501 is still available anywhere ?,

Thankyou all for any information.

I use piko and massoth together they are fine as long as you have the correct channels transmitting unit in them i.e usa or euro. I also purchased a 2.4ghz set and it’s also connected in the same dimx port on the command station

 

[mradd]

I picked up 5 second hand copies of Gartenbahn Profi at the WVR gala last week. In issues 2 and 4 2022 there was an article linking 433 and 2.4Ghz systems via LocoNet and XpressNet via a Tams Master Control, I do not read German so cannot comment how it was all done, however I can understand the simple diagram. The Massoth system was shown as the 433 plus Lenz on the XpressNet one, but with 2.4 systems shown as Tams, iTrain, Roco, TCS and Uhlenbrock but sadly not the Massoth. I wonder if there is a route hers for a tech savy bod to look at?

I have noted what @AlanL says in post #4.

Massoth are coming out with a new adapter/interface converter to assist with connecting to loconet and or express but no date or exact description as yet

 

[dunnyrail]

Nettuvj esi dunoph uav xovj e pix efeqvis/opvisgedi dupwisvis vu ettotv xovj duppidvoph vu mudupiv epf us iyqsitt cav pu fevi us iyedv fitdsoqvoup et ziv

Xuamf qsucecmz ci nadj civvis og vjiz deni uav xovj e hobnu vu tienmittmz mopl 433 epf 2.4 xovjop vjios uxp tztvin emmuxoph umfis atist vu jewi pix jepftivt us ati umf jepftivt up 2.4. Cav vjev xuamf ci muhodem vjoploph.

You must login or register to view hidden content on this page.